homecompanyproductsfeedbackpacking
  Hexagonal Wire Netting  
 
Hexagonal Wire Netting (Chicken/Rabbit/Poultry Wire) is made of low carbon Iron Wire, the mesh is firm in structure and has flat surface. It is extensively used in INDUSTRIAL AND AGRICULTURAL CONSTRUCTUONS AS REINFORCEMNET AND FENCING. It is also used as Fence for Poultry Cage, Fishing, Garden and Children playground, etc.
 
Assortments Available:
  • Electro Galvanized before Weaving
  • Electro Galvanized After Weaving
  • Hot Dipped Galvanized before Weaving
  • Hot Dipped Galvanized after Weaving
  • PVC Coated Before or After Weaving
  • Stainless Steel Wire
  • Galvanized Drawn Iron Wire

DIN1200, EN 10233-Z:1997, BS1485:1993)

Hex. wire netting, hot-dipped after weaving
Hex. wire netting, galvanized before weaving
Hex. wire netting, galvanized after weaving
Hex. wire netting, pvc-coated
Hex. wire netting of stainless steel
Hex. wire netting in normal twist
Hex. wire netting in reverse twist

 
 
Galvanized hexagonal wire netting
mesh Min. Gal.v.

G/SQ.M

Width
Wire Gauge (Diameter)

BWG

Inch


mm Tolerance(mm)
3/8" 10mm 1.0 0.7mm - 145 2' - 1M 27, 26, 25, 24, 23
1/2" 13mm 1.5 0.7mm - 95 2' - 2M 25, 24, 23, 22, 21
5/8" 16mm 2.0 0.7mm - 70 2' - 2M 27, 26, 25, 24, 23, 22
3/4" 20mm 3.0 0.7mm - 55 2' - 2M 25, 24, 23, 22, 21, 20, 19
1" 25mm 3.0 0.9mm - 55 1' - 2M 25, 24, 23, 22, 21, 20, 19, 18
1-1/4" 31mm 4.0 0.9mm - 40 1' - 2M 23, 22, 21, 20, 19, 18
1-1/2" 40mm 5.0 1.0mm - 45 1' - 2M 23, 22, 21, 20, 19, 18
2" 50mm 6.0 1.2mm - 40 1' - 2M 23, 22, 21, 20, 19, 18
2-1/2" 65mm 7.0 1.0mm - 30 1' - 2M 21, 20, 19, 18
3" 75mm 8.0 1.4mm - 30 2' - 2M 20, 19, 18, 17
4" 100mm 8.0 1.6mm - 30 2' - 2M 19, 18, 17, 16
 
Note:
1.) The above tolerance comply with standard EN10223-2:1997;

2.) Minimum Galvanization is only for typical wire diameter as stipulated separately in the column for your reference; Also it is only for hot dipped Galvanized Netting.

 
PVC Coated Hexagonal Wire Netting
Mesh Wire Gauge (MM) Width
Inch MM - -
1/2" 13mm 0.6mm - 1.0mm 2' - 2M
3/4" 19mm 0.6mm - 1.0mm 2' - 2M
1" 25mm 0.7mm - 1.3mm 1' - 2M
1-1/4" 30mm 0.85mm - 1.3mm 1' - 2M
1-1/2" 40mm 0.85mm - 1.4mm 1' - 2M
2" 50mm 1.0mm - 1.4mm 1' - 2M
Anping Xinlong Wire Mesh Manufacture Co.,Ltd also offer other specifications you need
 
Note: The thickness of PVC Coating is usually 0.2-0.4mm, others may arranged as per buyers' request;
Package: Normally each roll packed in water proof paper, then in termo foil (Shrinked Plastic);
 

 
right base
 
footer
Copyright © 2004 Anping Xinlong Wire Mesh Manufacture Co.,Ltd  
Tel: +86-318-7505111 7524300              
+86-318-7755777-7755796 (20)
Fax:+86-318-7505222 7755778 7523215 E-mail:sales@mesh-fence.com
Add: The South Side, 50m along West Side of Galvanizing Indurstry Zone, Anping, Hebei, China